Having problems exiting Nulldlc while in mGalaxy

[mrrexthegreat]

Normally, I have a button mapped to a controller that does Alt+F4 after being held for so long. However, this is does not seem to be working for Nulldlc. It will exit, but while I'm looking at the mGalaxy screen, I can't navigate anything. It's like it still thinks Nulldlc is running, even though it isn't. I've tried using ESC as well, but that doesn't even close the program. Any ideas on whats going on?

[Aeliss]

If you use the alt+f4 shortcut don't use script. Or try with a script with esc key.
It works if you press normal alt+f4 (without your mapped key) ?

[mrrexthegreat]

I turned off the script and it seems to be working now. Thanks!

[Stal8080]

Thanks for posting this topic because I was about to!!!  I can get NullDC to exit with the ESC key on the keyboard.  However is there a way to map it to one of my joystick buttons instead?  The same question/scenario applies to Fusion for Genesis games.

[Aeliss]

You can use Xpadder or Joytokey for exemple to map keyboard key on your joystick.
It's not possible to map a joystick button directly to exit emulator.

[Stal8080]

Thanks I'll try that.  Now I seem to have a bigger issue.  When configuring my joysticks with nulldc I open then elumator and loaded rom to test and now it runs incredible slow!!!  Any thoughts

[Aeliss]

After having configured the joystick, the game is still slow ?
Have you configured all the options ?

like "Enable dynarec" (need to be checked for better speed)

Can you copy/paste your nulldcc config file (without joypad part, useless)

[Stal8080]

See below thanks....this is frustrating me.  I have an Intel Core 2 Dual 3.0 ghz with 2 gb ram

;; nullDC config file;;
[nullDC]
Dynarec.Enabled=1
Dynarec.DoConstantPropagation=1
Dynarec.SafeMode=1
Dynarec.UnderclockFpu=0
Dreamcast.Cable=3
Dreamcast.RTC=2074075177
Dreamcast.Region=3
Dreamcast.Broadcast=4
Emulator.AutoStart=0
Emulator.NoConsole=0

[nullDC_plugins]
GUI=nullDC_GUI_Win32.dll
Current_PVR=drkPvr_Win32.dll
Current_GDR=ImgReader_Win32.dll
Current_AICA=nullAICA_Win32.dll
Current_ARM=vbaARM_Win32.dll
Current_ExtDevice=nullExtDev_Win32.dll
Current_maple0_5=drkMapleDevices_Win32.dll:4
Current_maple0_0=NULL
Current_maple0_1=NULL
Current_maple1_5=drkMapleDevices_Win32.dll:4
Current_maple2_5=NULL
Current_maple3_5=NULL
Current_maple0_2=NULL
Current_maple0_3=NULL
Current_maple0_4=NULL
Current_maple1_0=NULL
Current_maple1_1=NULL
Current_maple1_2=NULL
Current_maple1_3=NULL
Current_maple1_4=NULL
Current_maple2_0=NULL
Current_maple2_1=NULL
Current_maple2_2=NULL
Current_maple2_3=NULL
Current_maple2_4=NULL
Current_maple3_0=NULL
Current_maple3_1=NULL
Current_maple3_2=NULL
Current_maple3_3=NULL
Current_maple3_4=NULL

[nullDC_GUI]
AutoHideMenu=1
Fullscreen=1
AlwaysOnTop=0

[drkpvr]
Emulation.AlphaSortMode=1
Emulation.PaletteMode=1
Emulation.ModVolMode=0
Emulation.ZBufferMode=0
Emulation.TexCacheMode=0
OSD.ShowFPS=0
OSD.ShowStats=0
Video.ResolutionMode=0
Video.VSync=0
Enhancements.MultiSampleCount=0
Enhancements.MultiSampleQuality=0
Enhancements.AspectRatioMode=1

[ImageReader]
PatchRegion=0
LoadDefaultImage=0
DefaultImage=defualt.gdi
LastImage=C:\Users\TTe\Desktop\Emulators\Dreamcast\roms\Gauntlet Legends.cdi

[nullAica]
BufferSize=2048
LimitFPS=1
HW_mixing=0
SoundRenderer=1
GlobalFocus=1
BufferCount=1
CDDAMute=0
GlobalMute=0
DSPEnabled=0
Volume=90

[nullExtDev]
mode=0
adapter=0


local_port=0
server_addr=192.168.1.33
server_port=11122

[drkMaple]
VMU.Show=1
Mouse.Sensitivity=100

controllertype=0

[Xmaple]
Controller.DeadZone=25
PuruPuru.UseRealFrequency=1
PuruPuru.Length=175
PuruPuru.Intensity=100

[Aeliss]

I don't see something special. Try with another game, it's perhaps a game that need special config or not compatible.
The only difference I have.

Dreamcast.RTC=1543195063
don't know what is it.

PatchRegion=1
LoadDefaultImage=1
No chnage on performance, just in loading iso with command line

But I have made differently for mapping
Current_maple0_5=PuruPuru_Win32.dll:0
Current_maple0_0=drkMapleDevices_Win32.dll:2
In port A, I m selecting "purupuru Controller" and inside it, I m selecting "NullDc VMU"

My config > http://pastebin.com/8tuMaHPa

But I don't thing your mapping can decrease performance, make a try with another game.

[Stal8080]

Tried your config worked great until I switched to full screen and then slow down again???  Video card?

[Aeliss]

Realy strange, Im using an old 9600 Gforce card, 10 years old without problem. But 7300 is perhaps too weak, but there is few differences beetween windowed and fullscreen, emulation use more the main processor than graphic one.

Try with graphics options.

The demul old version =< 0.5.7 is working on fullscreen mode ?

[Stal8080]

[quote="Aeliss"]

Realy strange, Im using an old 9600 Gforce card, 10 years old without problem. But 7300 is perhaps too weak, but there is few differences beetween windowed and fullscreen, emulation use more the main processor than graphic one.

Try with graphics options.

The demul old version =< 0.5.7 is working on fullscreen mode ?
[/quote]

I thought my computer processor is powerful enough maybe not???  Core2Duo 3.0

Tried Demul 5.7 briefly and just kept crashing after I would config.

[Aeliss]

Core2 3ghz is enought to have it working from my memory, but apparently your problem is the fullscreen mode, there is no reason for nullDC works perfectly in windowed mode and not fullscreen, you haven't special configuration somewhere ? in graphic driver or nullDc pluggin ?

[Stal8080]

[quote="Aeliss"]
Core2 3ghz is enought to have it working from my memory, but apparently your problem is the fullscreen mode, there is no reason for nullDC works perfectly in windowed mode and not fullscreen, you haven't special configuration somewhere ? in graphic driver or nullDc pluggin ?
[/quote]

to my knowledge no...the only thing I can think of is to update my drivers for graphics card?