Page 1 of 1
x360ce error
Posted: Mon Apr 06, 2015 12:36 pm
by Spyke
Hi,
I use an THT Arcade 2Player USB controller an I tried x360ce to make it work with mGalaxy.
Everything works fine, I can config my controller and it works well in mGalaxy. But when I close mGalaxy, it gives a read error, the same happens for mGalaxy Runaway.
Did anyone know what is wrong?
If it's helpfull, I can post a picture of the error message.
Thank you and best regards
Marc
Re: x360ce error
Posted: Mon Apr 06, 2015 1:53 pm
by Aeliss
You can write your error message, but I think you will find more help on X360ce forum.
You don't have the X360ce exe running during your bug. It works on background ?
Try with an older version, I m using an old version, less problems than with the recent version.
Re: x360ce error
Posted: Mon Apr 06, 2015 3:42 pm
by mgalaxy
If it's helpfull, I can post a picture of the error message.
Yes, it would be helpful
Re: x360ce error
Posted: Mon Apr 06, 2015 3:43 pm
by Spyke
x360ce is not running, it works in background.
Can you tell me which old version of .exe and .dll works fine for you?
Find attached the error message, it´s in German only....
Re: x360ce error
Posted: Tue Apr 07, 2015 3:42 pm
by Aeliss
Ha ok, it's not X360Ce but mgalaxy who have problem, it's not the same problem.
I m using the 2.0.2.76 version, on a computer, and the last version on another, but without problem.
This one is a bug for Mgalaxy ^^.
Re: x360ce error
Posted: Tue Apr 07, 2015 8:09 pm
by Spyke
Ok, I didn't manage to get it work.......
Now I went to Joy2Key and it works just fine.
X360ce would be the better solution, maybe in the future it will work.
Thanks for your help.
Marc
Re: x360ce error
Posted: Tue Apr 07, 2015 9:21 pm
by mgalaxy
I would like to help! 'Unfortunately' I can't reproduce this bug.
Where are all your x360ce files located? Inside the mGalaxy executable folder?
Have you tried adding 'Version=1' to the 'x360ce.ini' option tag?
Code: Select all
[Options]
UseInitBeep=1
Log=0
Console=0
DebugMode=0
InternetDatabaseUrl=http://www.x360ce.com/webservices/x360ce.asmx
InternetFeatures=1
InternetAutoload=1
AllowOnlyOneCopy=1
Version=1
Re: x360ce error
Posted: Tue Apr 07, 2015 10:27 pm
by Spyke
All the files are located in the mGalaxy folder.
I have added Version=1, but at the beginning after [Options], should I move it to area you show it?
Without adding this, x360ce starts with an error.
The same proplem also came up, when I start and exit mGalaxy Runaway.